Submersible Motor Winding Wire POLYWRAP

INSTRUCTION FOR USE

Do not stack more than 4 coils otherwise, bottom coil is likely to get damaged due to upper coil weight.

Always keep away winding wire from those things having sharp edges and equipment generate heat to avoid unintentional damage. Also avoid welding spark falling on winding.

Motor manufacturers must ensure proper cable joining after winding to avoid megger or winding failer.

SPECIAL FEATURES

Good Temperature Resistance

Excellent Corrosion Resistance

Good Tear Resistance

High Tensile Strength

Negligible Leakage Current

Easily Bendable for easy Winding

Firm Insulation for high mechanical strength

Good Chemical and Thermal Resistant Properties

STANDARDS

Generally conforms to IS : 8783, DIN 53483, and VDE 0472

PACKING

500 Meters and 1000 Meters bundles available

SIZE

0.4 mm to 3 mm conductor

Specification

Sr. No.	Nominal Conductor Diameter mm	Conductor Cross Sectional Area Nominal mm	Appx. Overall Diameter mm	Max. D.C Conductor Resistance ohm/km	Elongation (min) %	Appx. Weight Per 1000m kg.
1	0.40	0.126	0.80	140	24	1.47
2	0.50	0.196	0.90	89.6	25	2.15
3	0.60	0.283	1.00	62.2	26	2.98
4	0.70	0.385	1.10	45.7	28	3.95
5	0.80	0.502	1.20	* 35	28	5.05
6	0.90	0.636	1.30	27.6	29	6.30
7	1.00	0.785	1.40	22.4	30	7.80
8	1.10	0.95	1.50	18.5	30	9.20
9	1.20	1.13	1.60	15.5	31	10.90
10	1.30	1.33	1.70	13.2	32	12.70
11	1.40	1.54	1.90	11.4	32	14.90
12	1.50	1.77	2.00	9.95	32	17.00
13	1.60	2.01	2.10	8.75	32	19.20
14	1.70	2.27	2.20	7.75	32	21.60
15	1.80	2.54	2.30	6.91	32	24.20
16	1.90	2.83	2.40	6.2	32	26.80
17	2.00	3.14	2.50	5.6	33	29.60
18	2.10	3.46	2.60	5.08	33	32.55
19	2.20	3.8	2.70	4.63	33	35.60
20	2.30	4.15	2.80	4.23	33	38.85
21	2.40	4.52	2.90	3.89	33	42.20
22	2.50	4.91	3.00	3.58	33	45.70
23	2.60	5.31	3.10	3.31	34	49.30
24	2.70	5.73	3.20	3.07	34	53.10
25	2.80	6.16	3.30	2.86	34	57.00
26	2.90	6.61	3.40	2.66	34	61.05
27	3.00	7.07	3.50	2.49	34	65.25

Note

The number of wires is approximate and wire diameter is nominal; they shall be such as to satisfy the requirements of conductor resistance of IEC 60228 / DIN VDE 0295 / IS 8130 / BS 6360

In view of continuous improvements in our design and process, specifications given here in are subject change without notice.